Email:sales3@sukelaser.com Jinan Suke Science & Technology Co.,Ltd

Jinan Suke Science & Technology Co.,Ltd

Fiber Metal Laser Cutting Machine Industrial 500W Fiber Laser Cutting Machine

fiber metal laser cutting machine industrial 500w fiber laser cutting machine Sample picture of the machine made: Machine picture : Technical parameter of the whole machine: Processing capacity Description 1. About laser generator : Technical parameter: Main Characteristics: 1. Superb quality of...

Product Details

fiber metal laser cutting machine industrial 500w fiber laser cutting machine


Sample picture of the machine made:

Machine picture :


Technical parameter of the whole machine:

Laser type

Fiber laser

Laser working medium

Fiber

Laser wavelength

1070 nm

Rated output power

500 W

Beam quality

<0.373mrad

Effective cutting range

3000×1500(mm)

Table axial positioning accuracy

≤±0.03mm/m

Repeat positioning accuracy table

≤±0.02mm/m

Cutting speed

≤30m/min

Maximum table load

1600KG

Power Ratings

Three-phase AC 380V 50Hz

Equipment electric power

9KW

Total power protection class

IP54


Processing capacity Description

Material

Thickness

Auxiliary gas

Carbon Steel

<6mm

Oxygen


Stainless Steel

<4mm

Oxygen


Aluminum

<1mm

Nitrogen


1. About laser generator :


Technical parameter:

optical parameter

Unit

500W

operational mode

CW,QCW

wavelength of the center radiation

nm

1070-1080

standard power output

W

500

optical quality

Mm*mrad

4

SPD speed

kHz

5

Optical fiber diameter

μm

≥50

output power stability (long-term)

%

±2

power supply

VAC

400-460

Power consumption (including supporting annex)

kW

2


Main Characteristics:

1. Superb quality of laser beam, constant BPP within all the ranges of laser powers,so that long focus can still get pretty small laser spot.


2. Special wavelength (1070 nm), having special capability of cutting highly-reflective materials, such as aluminium, cooper and brass, etc.


3. electro-optical conversion efficiency of laser supply>25%, much more efficient than CO2(<10%), so that consumption of electricity has been depleted very much.


3. Laser is transmitted by fiber cables, almost no consumption during transmission.


4. Modular design, “using immediately after plugging in”, mini size, easy to be installed, no maintenance of laser supply and transmission system of laser beam.


5. Life span of pumping source>100,000 hours


Comparison between different laser suppliers:

electro-optical conversion efficiency

25%

10%

Power consumption

2.5 KW

>10KW

BPP

<2.5

6

Life span of semiconductor pump

>100,000

NA

Cutting speed

3X

1X

Need of special gas

NO

Need laser pump gas

maintenance

NO

Yes

Flexible processing

Yes

No


Environmental adjusting

Shockproof, oilproof,dustproof

Need to avoid shock,need to be sealed

Stability

Best

Good

Absorptivity—steel

35%

12%

Absorptivity—aluminium

7%

2%

Spare parts

Highly-bright broadband single core semiconductor laser supply, much more than 100,000 hours of pump time. Every pump source is independent,so if one of them is broken, laser supply can also work normally, but the laser power will be a little reduced.

The gas is needed,when laser supply is working. And the reflective lens must be changed.


2.About Lathe bed

SK - 1325 eries cutting machine lathe bed part completely independent research and development, by the party tube welding lathe bed base, through the large gantry milling machine.

For large machine tool lathe bed we have many years of experience in processing, each lathe bed will be placed 30 days to 45 days after rough machining natural failure, the internal stress release completely again after finishing, ensure the machining accuracy.


3. About control box:


The control box of fiber laser cutting machine is configured separately to reduce interference and easy to maintain.

To ensure the stability and avoid signal interference,we use the following measures based on electrical technology

1. The main circuit and control circuit are connected by wires separately bypass.

2. The wire of main controller use shielded or twisted wire.

3. The connection of motor and driver use separate outlet to avoid parallel with other wires.

4. I/O interface chip,controller,sensor and the connector are as close as possible.

5. The connect wire between upper and lower equipment use the Aerial plug connector and Weidmuller terminal block.


4. AboutSafety Protection System:

The laser radiation have some damage on the human body which make the protection of the whole system very important

a:Laser module protection

b: The laser module have warning sign to introduce the laser out avoid harm from direct laser;

c: The cover have ground connection to avoid hurt from leakage.

d: The operator need to wear suitable laser protection glasses throughout the operation;

e: Make sure the protection equipment have no wear and tear before operating;

f: Do NOT look the laser out head at any time when the device is powered;

g:External Transmission fiber Protect section

h: The workstation of external transmission fiber,use imported high quality guide pulley and Limit device to fix and guide laser cable;

i: The transmission fiber have protective cover made of special laser protection material to prevent the laser leak;

j: The protective cover of transmission fiber have leak sensor,if the fiber fractured to cause the laser leak,the sensor will transmit the signal to control center immediately,then the control center will stop the laser equipment and alarm.



5. Laser cutting heads:

Using CypLite fiber laser cutting head,which has Z axis follow-up function. Highly sensitive and follow-up cutting head appliescapacitance sensor monitoring, offering automatic adjusting function with stable and fast cutting.All kinds of matching design of nozzle are applied to lens with many focuses and can also be equipped with optical lens with different focuses. The focus and nozzle can be adjustable flexibly, including adjusting lens on X-Y direction and nozzles on the same axis.


Questions:

Can I Engrave metals with a CO2 Laser?

Answer is No!

But Co2 laser can Engrave Anodized metal and some metal with Ceramic coatings, plastic coatings or paints!


How do I learn to operate lasers?

1)User manual, CD with video will along with machine for training you how to install, how to use, and how to maintains,

2)Moreover, Skype, Teamviewer online service is available for you,

3)Free training will offer you on our factory,Engineer is available to offer international service!

4)Local agent service available is extending all over the world!

Hot Tags: fiber metal laser cutting machine industrial 500W fiber laser cutting machine, China, suppliers, manufacturers, customized, low price, discount, in stock
Related Products
Copyright © Jinan Suke Science & Technology Co.,Ltd All rights reserved.
QR Code